• ハブスタンドPLUS キット (1台分セット) - 813 Alignment Tools
  • ハブスタンドPLUS キット (1台分セット) - 813 Alignment Tools
  • ハブスタンドPLUS 単品 (1台分セット) - 813 Alignment Tools
  • ハブスタンドPLUS 単品 (1台分セット) - 813 Alignment Tools
  • ハブスタンドPLUS キット (1台分セット) - 813 Alignment Tools
  • ハブスタンドPLUS キット (1台分セット) - 813 Alignment Tools
  • ハブスタンドPLUS キット (1台分セット) - 813 Alignment Tools
  • ハブスタンドPLUS キット (1台分セット) - 813 Alignment Tools
  • ハブスタンドPLUS キット (1台分セット) - 813 Alignment Tools
  • マイビデオ2.mp4__PID:d1aebe47-28a8-43eb-8431-d2099ffe4007
  • ハブスタンドPLUS 単品 (1台分セット) - 813 Alignment Tools
  • ハブスタンドPLUS 単品 (1台分セット) - 813 Alignment Tools
  • ハブスタンドPLUS キット (1台分セット) - 813 Alignment Tools
1 13

813 Alignment Tools

Hub Stand PLUS Kit (Set of 4)

Hub Stand PLUS Kit (Set of 4)

¥234,800
¥234,800
Sale Sold out
Taxes included.

受注製作（発送目安：約3週間〜）

ご注文前のご案内 本製品は受注製作のため、製作前に必ず一度ご連絡を行っています。
未定の項目があってもご注文可能です。寸法・仕様はご注文後に最終決定できます。 ▶ 寸法指定について（説明を見る）

Dimensions

ハブスタンドPLUS 単品 (1台分セット) - 813 Alignment Tools
① PCD / Number of holes

Please specify the PCD and number of holes according to your vehicle's hub specifications.

② Ground to hub center height (tire radius)

Please specify the height from the ground to the center of the hub, based on the vehicle with tires installed.

Hub Stand PLUS (Standard Size Compatible)
Typical Car Type Example Models
Mini/Compact S660, Beat, Copen,
Roadster, Swift, etc.
Sports S2000, 86/BRZ, RX-8,
Fairlady Z, WRX STI, etc.
High Performance NSX, Supra, RC F, GT-R,
RX-7, etc.

*The above are typical car examples. Compatibility may vary depending on the model year and specifications.

③ Wheel diameter (inches)

Please specify the inch size of the wheels used to determine the magnet scale spacing for toe adjustment.

Based on the specifications provided above, the product will be manufactured to match your vehicle's specifications.

Contents

Hub Stand PLUS
Hub Stand PLUS x 4

It supports the vehicle in a stable state and enables repeatable alignment measurements.

surface plate
Surface plate x 4

It corrects for slight differences in floor height and tilt to create optimal measurement conditions.

Toe adjustment tool
Toe adjustment tool x 4

This is a part used when adjusting the toe. Each toe adjustment tool comes with three magnetic scales and a support bar.

Payment method

The following payment methods are available for this product:

・Credit card payment (Visa / Master / JCB / AMEX)
・Installment payments provided by credit card companies ( up to 24 installments )
・Apple Pay / Google Pay
・Bank transfer (PayPay Bank, account information will be sent by email after ordering)

Electronic payments use secure payment processing by Shopify or SoftBank Payment Service (SBPS).

The number of credit card installments and fees vary depending on your credit card company's regulations.

Warranty Information

This product is guaranteed against defects under normal use.
We will check the situation and then repair or replace the product.

Due to the characteristics of the product, errors and damage caused by the usage environment and installation condition are
This may not be covered by the warranty.
Detailed conditions are Warranty and Support Page Please check.

Support and Inquiries

For questions regarding usage and measurement procedures,
We also provide support for checking specifications and asking about dimensions before purchasing.

We provide guidance based on actual usage scenarios, so
If you have any questions Please feel free to contact us.

View full details

使い方ガイド

フィッティング保証

よくある質問

お問い合わせ

フォームから相談

チェックするだけでOKです。分からない項目があればそのまま送信してください。

検討中製品(選択)

寸法選択・入力について

PCD / 穴数が分からない
ハブ中心～地面距離が分からない
ホイールインチ数が分からない

製品選定について

どの製品を選べばいいですか？
製品の違いを知りたい

その他

基本情報

車種・型式（必須）
メールアドレス（必須）

Hub Stand PLUS

Options